Siemens SINUMERIK 828D Commissioning Manual page 341

Transfer step
4
DB9900.DBW24
→ Continue with Step 8
Step 8: End acknowledgment
← Previous step: Step 7 or Step 14
End acknowledgment takes place with tool changeover in the initial setting, or in a state where the
machine can continue machining. Here it is possible that there are still mechanical movements to be
executed before the tool change can be completed.
Acknowledgment to TOOLMAN:
Acknowledgment
step
1
→ Continue with Step 9
Step 9: Old tool from spindle to gripper 2
← Previous step: Step 5
The PLC program controls the machine functions with which the gripper movements, tool clamping,
etc. are performed. As soon as the mechanical movements are completed and acknowledged in the
PLC user program, the tool movements are acknowledged to the tool management.
Acknowledgment to TOOLMAN:
Acknowledgment
step
8
Old tool from spindle to gripper 2 → Step 6 or 9
Transfer step
2
DB9900.DBW8
→ Continue with Step 10
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
From
Magazine Location
9998 3
Acknowledgment Transfer step new
bit tool
DB4200.DBX0.1 0
Acknowledgment Transfer step new
bit tool
DB4200.DBX1.0 0
From
Magazine Location
9998 1
9.8 Application example for milling machine
To
Magazine
0
Transfer step old
tool
0
Transfer step old
tool
2
To
Magazine
9998
Tool management
Location
2
Status
1
Status
105
Location
3
327