Configuring The Online Help - Siemens SINUMERIK 828D Commissioning Manual

Dialogs

4.3 Configuring the online help

Parameter:
Parameters 2 and 3 are separated by blanks and act as control characters for alarm text output.
To ensure that the text format is identical to that of the alarm texts, you must set zero.
Examples of language-dependent texts:
85000 0 0 "Retraction plane"
85001 0 0 "Drilling depth"
85002 0 0 "Pitch"
85003 0 0 "Pocket radius"
4.3 Configuring the online help
Online help
An online help for the configured dialogs and elements can be created in the HTML format.
The syntax and procedure for the online help is essentially the same as for SINUMERIK
Operate.
If an online help is configured for an input field, then the standard screens of the online help
are used to display the user-specific online help:
DEF RFP=(R//1/,"RFP","RFP"///////"sinumerik_md_1.html","9006")
Note
As a result of LINUX, the HTML file must be written in lower case letters!
The HTML file is saved in the following directory, e.g. for English.
[System user directory] /hlp/eng
[System oem directory] /hlp/eng
[System add_on directory] /hlp/eng
You must create directories for additional languages corresponding to the language identifiers
(see the Appendix).
58
xxxx 85,000 to 89,999
"Text"
%n
Text identification number range reserved for
users. You must assign unique numbers.
Text that appears in the dialog
Control characters in the text for creating a line
break
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3