Siemens SINUMERIK 828D Commissioning Manual page 965

Adapting the configuration file
Check your configuration files regarding the following points:
● Compare the start softkeys with the currently permissible softkeys (see the list of start
softkeys in the Appendix) and if required, adapt them.
● Rename the integrated image files corresponding to the "Image files" point above.
The data is stored, e.g. for OEM modifications, in the following directory:
[System oem directory] /proj
[System user directory] /proj
[System add_on directory] /proj
Adapting the help files
All help files must be saved in UTF-8. Check your existing files, and resave them accordingly
with a suitable editor.
The HTML files are saved in the following directory, e.g. for English:
[System oem directory] /hlp/eng
[System user directory] /hlp/eng
[System add_on directory] /hlp/eng
You must create directories for additional languages corresponding to the language identifiers
(see the Appendix).
Checking the "Run MyScreens" license
Check whether the number of dialogs that you have entered exceeds the basic scope of a
maximum of five dialogs.
To expand the number of dialogs, you require one of the following software options:
● SINUMERIK 828D/840D sl, SINUMERIK Integrate Run MyScreens
(6FC5800-0AP64-0YB0)
● SINUMERIK 840D sl, SINUMERIK Integrate Run MyScreens + Run MyHMI
(6FC5800-0AP65-0YB0)
● SINUMERIK 840D sl, SINUMERIK Integrate Run MyHMI / 3GL
(6FC5800-0AP60-0YB0)
● SINUMERIK 840D sl, SINUMERIK Integrate Run MyHMI / WinCC
(6FC5800-0AP61-0YB0)
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
3.6 Notes for personnel changing over to "Run MyScreens"
Fundamentals
35