Siemens SINUMERIK 828D Commissioning Manual page 290

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Tool management

9.3 NC ↔ PLC user interface

● Multitool: Number of locations

Number of tool locations available in the multitool

● Multitool: Tool distance

Value for the distance coding: Tool location number in the multitool, or angle or distance

of the tool within the multitool

● Multitool: Number (source) / multitool: Location number (source) of the new tool

Magazine number / location number from where the new multitool comes (mostly a location

in a real magazine).

● Multitool: Number (target) / multitool: Location number (target) of the old tool

Magazine number / location number to where the old multitool is to be transported (mostly

a location in a real magazine).

● Location type: Location type of the new tool

● Size left: Space required for the multitool in the magazine at the left

● Size right: Space required for the multitool in the magazine at the right

● Size top: Space required for the multitool in the magazine at the top

● Size bottom: Space required for the multitool in the magazine at the top

● Tool status

● T number of the tool

● Spindle number / tool holder number

● Multitool: Original magazine number

● Multitool: Original location number

Acknowledgments: Interface description

DB4200 ... 42xx

Signals to tool management [r/w]

Multitool: Location number (INT)

Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3

CNC commissioning

Show Quick Links

Chapters

Table of Contents