Saving Network Settings - Siemens SINUMERIK 828D Commissioning Manual

NOTICE
Security risk
Note that opening the ports in the firewall can represent a security risk. Only enable the ports
that you actually require.
Note that every accessible service can have security gaps.
Procedure
4.3

Saving network settings

The settings made in the NCU can be saved as a file.
A target folder in which the network configuration is to be saved, or an existing file that is to
be overwritten with the new settings, can be selected in the Save Network Settings: Select
Archive window.
Procedure
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
1. The network overview is open.
2. Press the "Company network" softkey.
The "Settings of the Company Network" window opens.
3. Press the "Change" softkey to edit settings.
1. The network overview is open and you have made network settings.
2. Press the "Save NCU settings" softkey.
The "Save Network Settings: Select Archive" window opens.
3. Select the folder in which the network configuration is be stored. If a file
is already available, it will be overwritten.
- OR -
Press the "New directory" softkey to create a new directory.
- OR -
Press the "Find" softkey, for example, to find the storage location of the
network configuration file.
4. Press the "Find next" softkey if the file found during the search does not
correspond to the required configuration file.
5. Press the "Cancel" softkey to reject the settings.
Configuring the network
4.3 Saving network settings
39