Configuring List Parameters - Siemens SINUMERIK 828D Commissioning Manual

Identifier
MultiToolPlaceStateEmpty
MultiToolPlaceTNo
MultiToolPlaceAdaptNo
MultiToolPlaceNo
MultiToolPlaceUser_1, ... Mul‐
tiToolPlaceUser_10
MultiToolPlaceAppl_1, ... Mul‐
tiToolPlaceAppl_10
Parameter corresponds to the system variable or the system variable is the basis for this
*)
parameter.
9.2.3

Configuring list parameters

<PARAMETERCONFIGURATION> tag
In the <PARAMETERCONFIGURATION> tag, you have the following options:
1. Changing list parameters.
2. Creating new list parameters based on an existing parameter.
Changing list parameters
You can change all list parameters included in the system.
Tool parameter identifiers (Page 240)
Cutting parameter identifiers (Page 242)
Monitoring parameter identifiers (Page 244)
Grinding parameter identifiers (Page 245)
Magazine location parameter identifiers (Page 246)
Magazine location adapter parameter identifiers (Page 247)
Multitool parameter identifiers (Page 247)
Multitool location parameter identifiers (Page 248)
Entries
HeadLine
Tooltip
ShortText
DetailsText
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Parameter or property
Multitool location empty
Tool number of the tool in this multitool location $TC_MTPP6
Adapter number
Multitool location number
OEM multitool location parameters 1 to 10
Siemens application multitool location parame‐
ters 1 to 10
Meaning
Column header. Text entered is displayed as a header.
Example: Text "Radius" is displayed as a header (default).
Text that is displayed in the tooltip.
Example: Text "Geometry radius" is displayed in the tooltip (default).
Text if the parameter is displayed in the "More Data" window.
Example: Text "Rad." is displayed in the "More Data" window (default).
Text, if the parameter is displayed in the "Details" window.
Example: Text "Radius" is displayed in the "Details" window (default).
Tool management
9.2 Configuring the user interface
System variable
$TC_MTPP4, Bit1
$TC_MTPP7
-
$TC_MTPPC1, ...
$TC_MTPPC10
$TC_MTPPCS1, ...
$TC_MTPPCS10
*)
249