Siemens SINUMERIK 828D Commissioning Manual page 214

Tuning
6.5 Optimize the spindle
Use the cursor keys to set the acceleration time.
● Trace selection: Actual speed (Trace 1)
The cursor is positioned at the trace start and at the point where the speed setpoint is
attained.
Time needed for acceleration to the speed setpoint = 2.5 seconds
● Trace selection: Actual speed (Trace 2)
The power used to accelerate the motor can be seen on Trace 2:
Maximum available power = 1.5 kW = S1 curve
● Trace selection: Torque setpoint (Trace 4)
The torque setpoint can be seen on Trace 4:
Torque setpoint = 4.8 Nm = S1 curve
200
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
CNC commissioning