Siemens SINUMERIK 828D Commissioning Manual page 699

Display data
Spindle speed setpoint cur‐
rent
Position offset to the
leading axis / spindle actual
value
Position offset to the
leading axis / spindle setpoint
Override
Current gear stage
Parameter set (axis)
Controller mode
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Meaning
Current active speed setpoint with correct sign, including calculated
compensation value and any active speed limitation (specified by set‐
ting or machine data)
Unit: rpm
Display applies to spindles only.
The currently valid position offset value is displayed here (relative to the
actual value) if a position offset (angular offset between the following
and leading spindle) has been programmed within the synchronous
spindle functionality.
Unit: mm, inches, degrees
References:
Function Manual, Extended Functions; Synchronous Spindle (S3)
The currently valid position offset value is displayed here (relative to the
setpoint) if a position offset (angular offset between the following and
leading spindle) has been programmed within the synchronous spindle
functionality.
Unit: mm, inches, degrees
References:
Function Manual, Extended Functions; Synchronous Spindle (S3)
The effective correction factor of the feed or spindle correction switch
is displayed.
Unit: %
Display of the current actual gear stage
With axes, this is only displayed if a spindle is assigned to the axis. The
display corresponds to the NC/PLC interface signal:
DB31, ... DBX16.0-2 (actual gear stage)
References:
Function Manual, Basic Functions; Spindles (S1)
Displays which of the six parameter sets of the position controller is
active.
References:
Basic Functions Function Manual; Velocities, Setpoint / Actual Value
Systems, Closed-Loop Control (G2)
Display of the current controller state:
● Position control
● Speed control
● Hold
● Parking
● Follow-up
● Braking
References:
Function Manual, Basic Functions; Various NC/PLC interface signals
and functions (A2)
Service and diagnostics
10.2 Displaying the Service overview
331