Siemens SINUMERIK 828D Commissioning Manual page 597

4. Change the file name according to the set technology:
5. Remove the comments of the example in the template to create your specific configuration.
Configuration examples
Examples for all possible configurations are provided in the template oem_sltmlistconfig.xml,
which are described individually in the following sections:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
- <CONFIGURATION>
<!--
<!--
<!--
Configuration examples
<!--
<!--
<!--
</CONFIGURATION>
Enter your configuration using the following xml identifiers:
Identifier <tag>
<SETTINGS>
<LISTCONFIGURATION>
<PARAMETERCONFIGURATION>
<TOOLTYPECONFIGURATION>
<MOREDATACONFIGURATION>
<NEWTOOLFAVORITECONFIGURATION>
<NEWTOOLCONFIGURATION>
<NEWMULTITOOLCONFIGURATION>
<NEWTOOLIDENTCONNECTIONCONFIGURATION>
<NEWTOOLSAVETOOLDATACONFIGURATION>
<NEWTOOLDEFAULTVALUECONFIGURATION>
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
File name
sltmlistconfig.xml
sltmturninglistconfig.xml
sltmcirculargrindinglistconfig.xml
sltmsurfacegrindinglistconfig.xml
sltmplclistconfig.xml
************************************************************-->
enter your configuration behind this comment -->
************************************************************** -->
************************************************************** -->
enter your configuration ahead this comment -->
************************************************************** -->
9.2 Configuring the user interface
Technology
Milling technology
Turning technology
Cylindrical grinding technology
Surface grinding technology
PLC tool management "TRANSLINE 2000"
for the following setting:
General settings (Page 230)
Configure the tool lists (Page 236)
Configuring list parameters (Page 249)
Configure tool types (Page 255)
Configuring the "Additional Data" window
(Page 257)
Configure the "New tool - favorites" window
(Page 259)
Configuring the "New Tool" window (Page 259)
Configuring the "New Multitool" window
(Page 260)
Configuring the "New Tool from Code Carrier"
window (Page 261)
Configuring the "New Tool from File" window
(Page 261)
Configuring default values for new tools
(Page 262)
Tool management
229