Siemens SINUMERIK 828D Commissioning Manual page 984

Dialogs
4.2 Defining softkey menus
Programming
Syntax:
Description:
Parameter:
54
SK.st = "Text"
SK.ac = Access level
SK.se = Status
SK.pa = "Alignment of the softkey image"
SK.tp = "Text alignment in relation to the soft‐
key image"
Assign properties
Text
Access level
Status 1:
2:
3:
Alignment of the 0:
softkey image
1:
2:
3:
4:
Text alignment in 0:
relation to the
1:
softkey image
;Softkey with label
;Softkey with protection level
; Softkey with status
;Softkey with image
;Softkey with image and label
Label text in inverted commas
Range of values: 0 ... 7
Visible and operator-controllable
Disabled (gray text)
Highlighted (last softkey used)
Left
Right
Centered
Top (default)
Bottom
Text is not aligned to the image
Text is aligned to the image (default)
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3