Siemens SINUMERIK 828D Commissioning Manual page 195

Path interpolation
In the next step, the axes for the path interpolation are selected.
Procedure:
1. Press the "Path interpolation" softkey. The axes that interpolate together are assigned to
"Channel 1".
2. Press the "Edit & tune" softkey.
3. Select only those axes that can interpolate together.
The X axis and the Y axis are selected for the following example:
4. The calculated path-optimal values are displayed for the selected axes. The axis-optimal
values from the tuning of the individual axes are displayed below for comparison:
5. Select "Accept" and confirm with OK.
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
6.2 Automatic servo optimization
Tuning
181