Siemens SINUMERIK 828D Commissioning Manual page 123

14.Select the "Finish >" softkey to exit the commissioning of this drive object. In case of
changes, a query to save is output.
15.To ensure that the data after power ON/OFF is retained, confirm with "Yes".
The data is saved to the CompactFlash card and installed in a commissioning archive with
drive data.
The spindle has now been commissioned.
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Commissioning the drive
5.1 Commissioning the drive
109