Siemens SINUMERIK 828D Commissioning Manual page 315

Synchronous acknowledgment
The tool is no longer in the spindle.
Transfer step
6
DB9900.DBW40
Acknowledg‐
ment step
xxx
After intermediate acknowledgment of the empty spindle and insertion of the new tool in the
spindle, the tool change is terminated with a total acknowledgment:
Acknowledg‐
ment step
Starting position 2
A manual tool is in the spindle and is to be replaced by a tool from the magazine.
Job from tool management to the PLC user program (tool change):
DB4300.DBX0.0, DBX1.2 and DBX1.6 ("Prepare tool change")
DB43xx.DBW6
DB43xx.DBW8
DB43xx.DBW10
DB43xx.DBW12
Acknowledgment "Prepare tool change":
Acknowledg‐
ment step
xxx
Displayed on the interface: DB4300.DBX0.0 /1.1 and 1.6 ("Execute tool change")
The job remains otherwise unchanged, the tools are still at the starting positions.
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
From
Magazine Loca‐
tion
9998 1
Acknowledgment bit Transfer step for
the new tool
DB4200.DBXx.x 0
Acknowledgment bit Transfer step for
the new tool
DB4200.DBX0.0
Source magazine number
Source location number
Target magazine number
Target location number
Acknowledgment bit Transfer step for the
new tool
DB4200.DBXx.x 0
9.6 Example: Change manual tools
To
Magazine Location
9999 1
Transfer step for
the old tool
6
Transfer step for
the old tool
Transfer step for the
old tool
0
Tool management
Comment
Tool removed from the
spindle
Status
105
Status
(99)
1
6
9999
1
Status
1
301