Notes On The Easyscreen.ini - Siemens SINUMERIK 828D Commissioning Manual

Fundamentals

3.5 Notes on the easyscreen.ini

DEF Var1=(R)
DEF VAR2 = (R)
LOAD
VAR1 = VAR2 + 1
...
//END
; The right entry would be,
for example:
//M(Maske1)
...
3.5 Notes on the easyscreen.ini
As of SINUMERIK Operate V4.7, the easyscreen.ini has been extended by the entries
described in this section. The easyscreen.ini can be found in the
cfg directory.
Help display start position
Entry in easyscreen.ini:
[GENERAL]
HlpPicFixPos=true
Note:
The start position of help displays is positioned at the configured pixel position independent of
the resolution (default=true).
Elongation behavior, default line height and line spacing
Entry in easyscreen.ini:
[GENERAL]
SymmetricalAspectRatio=false
DefaultLineHeight=18
32
DEF Var1=(R)
DEF VAR2 = (R)
LOAD
VAR2 = 7
VAR1 = VAR2 + 1 ;
; Error message in log book, as VAR2 has no value
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
[System Siemens directory] /
SINUMERIK Integrate Run MyScreens