Displaying The Log File - Siemens SINUMERIK 828D Commissioning Manual

Procedure
See also
Displaying the log file (Page 367)
10.6.2

Displaying the log file

Loggable data that was logged when the action log function was active is displayed in the
"Action Log File" window.
Log files
The actual data can be displayed using the following files:
● "actual_actionlog.com"
● "actual_crashlog.com"
Procedure
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
1. Select the "Start-up" operating area.
2. Press the "HMI", "Diagnostics", and "Action log" softkeys
The "Action Log Settings" window opens.
3. Activate the "Logging on" checkbox to activate the action log.
4. Activate the relevant checkbox if you want to acquire particular events in
the action log.
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
The data tree is displayed.
You will find the saved files in the HMI data folder under /logs/action log.
Service and diagnostics
10.6 Action log
367