Creating Oem Texts - Siemens SINUMERIK 828D Commissioning Manual

Tool management

9.3 Creating OEM texts

The following settings can be made:
Entries
Enabled
UnloadWithDelete
CreateNewToolWithDialog
ForceSisterToolNumber
UseDefaultData
9.3 Creating OEM texts
9.3.1 Creating OEM texts
Overview
This section describes how you create OEM texts in a particular language.
The texts are created in the "sltmlistdialog_xxx.ts" file.
A dedicated file must be created for each language. The file names differ by the language
code. For "xxx", set the appropriate language code.
288
Meaning
true - Tool from/in file is offered.
false - Tool from/in file is not offered.
true - The tool is deleted when unloaded to a file. The "In File" function
is not offered for "Delete tool."
false - Default setting, on Unload to file the tool is only unloaded and is
kept in the NC memory.
true - Default setting, before the tool is created from a file, the tool data
is displayed in the "New Tool" window.
false - The tool is created directly in the tool list.
true - The sister tool number specified by the code carrier data is kept
when the tool is created.
false - Default setting, the sister tool number is freely assigned.
true - The new tool is initialized with the configured default data before
the data are taken over from the file (see tag <NEWTOOLDEFAULTVA‐
LUECONFIGURATION> Section "Configuring default values for new
tools (Page 262)").
false - Default setting, the new tool is not initialized with the configured
default data.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate