Load Trace Session File - Siemens SINUMERIK 828D Commissioning Manual

Service and diagnostics
10.4 Trace
10.4.5.3

Load trace session file

You have the option of loading already saved session data, to restart them or to display the
trace that has been recorded.
Settings
Variables, settings
Variables, settings and recorded val‐
ues
Precondition
A session file of recorded traces is available.
Procedure
362
- OR -
If the session file with this name already exists, then you obtain a corre‐
sponding confirmation prompt.
Meaning
You can restart a trace session that has already been created.
You can view the result of a trace session, change the variable
and if required, restart.
1. You have selected the "Trace" function.
2. Press the "Load trace" softkey.
The "Load Session File: Please Select File" window opens.
3. Select the desired session file from the appropriate directory, e.g. "Trace",
and press the "Display trace" softkey.
The "Load trace: session..." is opened.
4. Select the checkbox "Variables, settings", if you wish to immediately start
the trace session.
5. Press the "OK" softkey and the "Start trace" softkey to restart the
trace.
- OR -
Select the checkbox "Variables, settings and recorded values", if you wish
to display the trace session.
Press the "OK" softkey.
The data of the selected session are loaded displayed in the "Trace"
window.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate