Define Loading Location - Siemens SINUMERIK 828D Commissioning Manual

Element values
You can change the buffer location type with the parameters in the "Location" window:
Parameters
(Selection menu)
Index
9.8.4.3

Define loading location

Loading location are loading points or loading stations. All loading locations are stored in an
internal loading magazine with the number 9999. The number of loading locations is defined
from the "Magazine" window. The loading location type is defined from the "Location" window.
Directory values
You are currently located under the "Active data" → <tool unit> → <loading magazine> directory
in the "Commissioning" → "NC" →"Tool management" operating area.
You can define the following parameters in the "Magazine" window from the loading magazine
directory:
Parameters
Name
Magazine number
Locations
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
9.8 Editor for the tool and magazine management
Description
Select a buffer type
● Tool spindle / tool holder
● Loader
● Gripper
● Transfer location
The index counts the locations of a type.
Description
Designation of the loading magazine
The designation is displayed in the tree structure.
9999 (cannot be changed)
Number of loading locations
Tool management
317