Siemens SINUMERIK 828D Commissioning Manual page 42

Scope of delivery and requirements
1.6 Communication with the control
Network connection
To create a network connection:
1. In the menu, select "Settings" → "Connection" → "Direct connection" or click the "Connect"
button.
Figure 1-8
2. In the menu, select "Connection" → "Connect" → "Network connection" or select – if available
– one of the previously selected connections.
3. Connection is made to the parameterized control.
Note
SSh key file
As an alternative to entering a password, the user may also use an SSh key for authentication.
Please refer to the Online Help for more information on this topic.
28
Dialog: Network connection
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
CNC commissioning