Siemens SINUMERIK 828D Commissioning Manual page 178

Commissioning the drive
5.6 Configuring data sets
3. Press "Next step >".
"Cancel" terminates this process and the data set overview with MDS0 ... MDS3 is
displayed.
4. Press "Finish >" to accept the changes.
The data is written to the parameters. The results are then displayed:
When you exit this dialog, press "Yes" to confirm the prompt to save the data to the non-volatile
memory.
164
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
CNC commissioning