Siemens SINUMERIK 828D Commissioning Manual page 353

4. Choose whether the data classes should be "ignored" or "considered" using the <SELECT>
key:
– Select "ignored" to archive all data belonging to the control component.
– Select "considered" to write only the data in the data classes selected under "Selection"
5. Select the control component(s) for the archive.
6. Make use of the option to enter a comment and the creator of the archive.
7. Press the "OK" softkey to create the archive.
The "Create archive: Select archive" window opens.
8. Select a directory or press the "New directory" softkey to create a new subdirectory.
The "New Directory" window opens.
9. Enter a name and confirm with "OK."
The directory is created below the selected folder.
The "Create archive: Name" window opens.
10.Enter a name and confirm with "OK."
An archive file is created in the selected directory.
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
in the archive.
10.4 This is how you create a commissioning archive
Easy Archive
339