Siemens SINUMERIK 828D Commissioning Manual page 981

The definition of a softkey menu (softkey menu definition block) is basically structured as
follows:
Definition block
//S...
HSx=...
PRESS(HSx)
LM...
END_PRESS
//END
Description
Properties are assigned to softkeys during definition of the softkey menu.
Programming
Syntax:
Description:
Parameter:
Syntax:
Description:
Parameter:
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
Comment
;Start identifier of softkey menu
;Define softkeys
;Method start identifier
;Actions
;Method end identifier
;End identifier of softkey menu
(Identifier)
//S ;Start identifier of softkey menu
...
//END ;End identifier of softkey menu
See also Section Extended configuration syntax (Page 36).
Defines the softkey menu
Identifier Name of the softkey menu
Text or image file name
(Text[, Access level][, Status][, Alignment of the softkey image][, Text
SK =
alignment in relation to the softkey image])
Define softkey
SK Softkey, e.g. HS1 to HS8, VS1 to VS8
Dialogs
4.2 Defining softkey menus
Section reference
See Section "Methods"
51