Top Surface: Cycle832 Extension - Siemens SINUMERIK 828D Commissioning Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Dependent on the machining type:

Top Surface: CYCLE832 extension

Besides Advanced Surface, the High Speed Settings (CYCLE832) function also offers the

extension Top Surface. You can use Top Surface to improve the quality of free-form surfaces.

If set actively, the continuous-path control is optimized within contour tolerances. The

CYCLE832 call also contains the smoothing parameter.

Roughing, semi-finishing, or finishing with active smoothing

The tolerance value for Top Surface is transferred as a contour tolerance to the NC with

command CTOL.

SINUMERIK Operate

Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3

Software option

To use this function, you need the software option:

"Top Surface"

Configuring cycles

7.8 High Speed Cutting (HSC)

Show Quick Links

Table of Contents