Configuring The "Details" Window; Assignment Of To Units And Toolholders To Channels - Siemens SINUMERIK 828D Commissioning Manual

Tool management
9.2 Configuring the user interface
9.2.13

Configuring the "Details" window

<DETAILSCONFIGURATION> tag
In the tag <DETAILSCONFIGURATION>, you can make the settings for the "Detail" window:
Entries
ShowToolNumber
UseAxisNameInLength
ShowBaseLength
ShowYAxis
AutoDisplayAxisEnabled
Example
<DETAILSCONFIGURATION>
</DETAILSCONFIGURATION>
9.2.14

Assignment of TO units and toolholders to channels

Preassignment of TO units and toolholders to channels
The assignment between TO unit and channel is made via the MD28085 machine data. The
assignment between toolholder and channel is made via the MD20124 machine data (only
for TE822).
Each channel is assigned its own dedicated TO unit.
● Channel 1
● Channel 2
266
<ShowToolNumber value="true" type="bool" />
MD28085 $MC_MM_LINK_TOA_UNIT
= 1 The channel is assigned TO unit 1.
MD28085 $MC_MM_LINK_TOA_UNIT
= 2 The channel is assigned TO unit 2.
Meaning
The tool number is displayed in the upper right field of the "Detail" window.
The tool length is displayed with axis identifiers, for example, Length X
instead of Length 1.
If no data is specified, then the setting is taken from the tool lists.
The basic length is displayed in the "Detail" window (AdaptLength1,
AdaptLength2 and AdaptLength3).
If no data is specified, then the setting is taken from the tool lists.
The Y axis is displayed in the "Detail" window.
If no data is specified, then the setting is taken from the tool lists.
Several components of the tool length are displayed, even if only one
tool length is displayed in the tool list.
Assigns TO unit to a channel (SRAM)
Assigns TO unit to a channel (SRAM)
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate