Siemens SINUMERIK 828D Commissioning Manual page 492

Configuring cycles
7.5 Turning
MD24800 $MC_TRACYL_ROT_AX_OFFSET_1
= 0
MD24805 $MC_TRACYL_ROT_AX_FRAME_1
= 2
MD24810 $MC_TRACYL_ROT_SIGN_IS_PLUS_1
= 1
MD24820 $MC_TRACYL_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
Cylinder surface transformation with groove side offset
MD24300 $MC_TRAFO_TYPE_3
= 513
MD24310 $MC_TRAFO_AXES_IN_3[ ]
[0] = 1
[1] = 3
[2] = 2
[3] = 6
MD24320 $MC_TRAFO_GEOAX_ASSIGN_TAB_3[ ]
[0] = 1
[1] = 3
[2] = 2
MD24800 $MC_TRACYL_ROT_AX_OFFSET_1
= 0
124
TRACYL main spindle
Perpendicular to the rotary axis X1
Rotary axis (main spindle) C1
Parallel to the rotary axis Z1
parallel to the cylinder surface and perpendicular to the rotary axis Z1
1st channel axis X1
2nd channel axis Y1
3rd channel axis Z1
Offset of the rotary axis for the 1st TRACYL
transformation.
Axial offset of the rotary axis is taken into
account during TRACYL.
Sign of the rotary axis for the 1st TRACYL
transformation
Vector of the base tool for the 1st TRACYL
transformation.
Definition of 3rd transformation in channel
Axis assignment for transformation 3
Assignment of the geometry axes to chan‐
nel axes for transformation 3.
Offset of the rotary axis for the 1st TRACYL
transformation.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate