Siemens SINUMERIK 828D Commissioning Manual page 288

Tool management
9.3 NC ↔ PLC user interface
DB4300...43xx
DBBy032
DBBy033
DBWy034
DBWy036
DBWy038
DBWy040
DBWy042
DBWy044
DBWy046
DBWy048
DBWy050
DBWy052
DBWy054
DBWy056
DBWy058
DBWy060
DBWy062
DBWy064
DBWy066
DBWy068
DBWy070
DBWy072
DBWy074
DBWy076
DBWy078
DBWy080
DBWy082
DBWy084
DBWy086
DBWy088
DBWy090
y [= 0 or 1]: TO unit 1 or TO unit 2
xx: Tool holder
274
Signals from tool management [r]
Tool has Tool fixed- Tool be‐
been in location ing
use coded changed
Manual 1:1 --
tool Change
New tool: Internal T number of the NC (INT)
Reserved
Reserved
Reserved
Reserved
Free parameter 1 (DWORD)
Free parameter 2 (DWORD)
Free parameter 3 (DWORD)
Multitool: Type (INT)
Multitool: Number of locations (INT)
Multitool: Tool distance (FLOAT)
Multitool: Number (source) of the new tool (INT)
Multitool: Location number (source) of the new tool (INT)
Multitool: Number (target) of the old tool (INT)
Multitool: Location number (target) of the old tool (INT)
Location type (INT)
Size left (INT)
Size right (INT)
Size top (INT)
Size bottom (INT)
Tool status for new tool (INT)
T number of the tool (INT)
Spindle number / tool holder number (INT)
Multitool: Original magazine number (INT)
Multitool: Original location number (INT)
Tool status for a new tool:
Prewarn‐ Measur‐
ing limit ing tools
reached
Tool status for a new tool:
Master To be loa‐
tool ded
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Tool disa‐ Tool ena‐ Active tool
bled bled
To be un‐ Blocked Identifica‐
loaded tion for
tools in
the buffer
CNC commissioning