Siemens SINUMERIK 828D Commissioning Manual page 287

Interface signal
DB43xx.DBWy006 – DBWy034
DB43xx.DBXy100.0
DB43xx.DBXy100.1
DB43xx.DBXy100.0
DB43xx.DBXy100.1
DB43xx.DBXy100.0
DB43xx.DBBy104
DB43xx.DBXy108.0 -
DB43xx.DBXy111.6
DB43xx.DBWy124 – DBWy138
y [= 0 or 1]: TO unit 1 or TO unit 2
xx: Spindle index / tool holder
Jobs: Interface description
DB4300...43xx
Byte
DBBy000
DBBy001
DBBy002
DBBy003
DBBy004
DBBy005
DBWy006
DBWy008
DBWy010
DBWy012
DBWy014
DBWy016
DBWy018
DBWy020
DBWy022
DBWy024
DBWy026
DBWy028
DBWy030
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Signals from tool management [r]
Bit 7 Bit 6 Bit 5
Multitool: -- --
Data in
the multi‐
tool area
Tool re‐ Unload Load man‐
mains in manual ual tool
the spin‐ tool
dle
Reserved
Reserved
Reserved
Reserved
Source magazine number for new tool (INT)
Source location number for new tool (INT)
Reserved
Reserved
Reserved
Reserved
Target magazine number for old tool (INT)
Target location number for old tool (INT)
Location type (INT)
Size left (INT)
Size right (INT)
Reserved
Reserved
Meaning
Job description
Positive feedback: Acknowledgment status, acknowledgment OK,
one PLC cycle pending
Negative feedback: Acknowledgment status, acknowledgment er‐
ror, static pending
Positive feedback: Acknowledgment status, one PLC cycle pending
Negative feedback: Acknowledgment status, static pending
Tool management feedback: Acknowledgment status
Tool management feedback: Error status
Map of acknowledgments for tool change: This map belongs to the
positive or negative feedback and remains valid for the same time
Job status
Bit 4 Bit 3
-- --
No old tool T0
Tool management
9.3 NC ↔ PLC user interface
Bit 2 Bit 1 Bit 0
-- -- Job is still
active.
Prepare Change Fixed-lo‐
change tool (initi‐ cation co‐
ated by: ded
M06)
273