Siemens SINUMERIK 828D Commissioning Manual page 498

Configuring cycles
7.5 Turning
MD24432 $MC_TRAFO_AXES_IN_5[ ]
[0] = 5
[1] = 1
[2] = 2
MD24434 $MC_TRAFO_GEOAX_ASSIGN_TAB_5[ ]
[0] = 1
[1] = 5
[2] = 2
MD24436 $MC_TRAFO_INCLUDES_TOOL_5
= 0
MD24700 $MC_TRAANG_ANGLE_1
= 55
Data record for linking (TRACON) of end face machining on main spindle (TRANSMIT) and
inclined axis (TRAANG):
MD24440 $MC_TRAFO_TYPE_6
= 8192
MD24444 $MC_TRAFO_GEOAX_ASSIGN_TAB_6[ ]
[0] = 1
[1] = 3
[2] = 2
MD24995 $MC_TRACON_CHAIN_1[ ]
[0] = 1
[1] = 5
Data record for linking (TRACON) of cylinder surface transformation on main spindle
(TRACYL) and inclined axis (TRAANG):
MD24450 $MC_TRAFO_TYPE_7
= 8192
130
1st transformer axis = channel axis, Y1
2nd transformer axis = channel axis, X1
3rd transformer axis = channel axis, Z1
1st axis = channel axis X1
2nd axis = channel axis Y1
3rd axis = channel axis Z1
Tool handling with active transformation 5.
Angle between 1st and 2nd transformation axis. Data set for linking (TRACON) of end
face machining on main spindle (TRANSMIT) and inclined axis (TRAANG).
Type of transformation that is available as sixth in the channel.
1st axis = channel axis X1
2nd axis = channel axis Y1
3rd axis = channel axis Z1
Number of the TRANSMIT transformation (main spindle) for linking.
Number of the TRAANG transformation for linking. Data set for linking (TRACON) of
cylinder surface transformation on main spindle (TRACYL) and inclined axis (TRAANG).
Type of transformation 7 in the TRACON channel.
Axis assignment for transformation 5.
Assignment of geometry axes to channel
axes for transformation 5.
Assignment of geometry axes to channel
axes for transformation 6.
Transformation linking
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate