Siemens SINUMERIK 828D Commissioning Manual page 41

Note
Generally only one connection is permitted, i.e. several simultaneous connections to different
controls are not supported: Data exchange between two controls by means of "Access
MyMachine" is therefore not possible.
Direct connection
To create a direct connection:
1. The login data is entered in the dialog "Settings" → "Connection" → "Direct connection":
Figure 1-6
2. In the menu, select "Connection" → "Connect" → "Direct connection" or click the "Connect"
button.
The following dialog box is displayed:
Figure 1-7
3. The last selected direct connection is highlighted. Using the "Connect" button, a connection
to the IP address196.168.215.1 is created.
This dialog does not appear when the direct connection is selected using the menu.
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Dialog: Login data for direct connection
Dialog: Direct connection
Scope of delivery and requirements
1.6 Communication with the control
27