Siemens SINUMERIK 828D Commissioning Manual page 440

Simulation and simultaneous recording
6.4 Clamping a blank
Function options
In the program header, a blank can be optionally set to A, B, C and table clamping:
Clamping
A axis
B axis
C axis
Table
Note
To obtain the selection option in the program header, two rotary axes must be defined for the
raw part clamping.
72
View Machine data
MD52207 $MCS_USAGE_ATTRIB bit 0 and bit 8 = 1
MD52207 $MCS_USAGE_ATTRIB bit 1 and bit 8 = 1
MD52207 $MCS_USAGE_ATTRIB bit 2 and bit 8 = 1
MD52214 $MCS_FUNCTION_MASK_MILL bit 1 = 1
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate