Additional Settings - Siemens SINUMERIK 828D Commissioning Manual

Tool management
9.1 Machine data for tool management
Access levels for window "Internal Data"
MD51198 $MNS_ACCESS_READ_TM_ALL_PARAM
MD51215 $MNS_ACCESS_WRITE_TM_ALL_PARAM
Access levels for certain functions of the tool management
MD51216 $MNS_ACCESS_TM_TOOL_CREATE
MD51217 $MNS_ACCESS_TM_TOOL_DELETE
MD51218 $MNS_ACCESS_TM_TOOL_LOAD
MD51219 $MNS_ACCESS_TM_TOOL_UNLOAD
MD51220 $MNS_ACCESS_TM_TOOL_MOVE
MD51221 $MNS_ACCESS_TM_TOOL_REACTIVATE
MD51222 $MNS_ACCESS_TM_TOOL_MEASURE
MD51223 $MNS_ACCESS_TM_TOOLEDGE_CREATE
MD51224 $MNS_ACCESS_TM_TOOLEDGE_DELETE
MD51225 $MNS_ACCESS_TM_MAGAZINE_POS
9.1.3

Additional settings

Additional settings
You can enable further functions on the user interface via the following machine data / setting
data:
MD52270 $MCS_TM_FUNCTION_MASK
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
224
Creating a tool at the magazine location is not permitted.
Load/unload lock if the machine is not in the reset state.
Load/unload lock for EMERGENCY OFF.
Loading/unloading or relocating tool in/out of spindle locked.
Tool loaded directly into spindle.
Using the grinding configuration file.
Relocating a tool in/out of spindle is permitted despite lock (see bit 3).
Tool is created using the number.
Hide tool relocation.
Hide magazine positioning.
Reactivate tool with magazine positioning.
Protection level TOOLMAN details -
Read internal data.
Depending on the machine data, the
"Internal Data" softkey is either hidden
or displayed.
Access level TOOLMAN details - Write
internal data.
Access level, TM, create tool.
Access level, TM, delete tool.
Access level, TM, load tool.
Access level, TM, unload tool.
Access level, TM, move tool.
Access level, TM, reactivate tool.
Access level, TM, measure tool.
Access level, TM, create tool cutting
edge.
Access level, TM, delete tool cutting
edge.
Access level, TM, position magazine.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate