Set Date/Time - Siemens SINUMERIK 828D Commissioning Manual

General settings

1.2 Set date/time

Result
When the changes have been accepted, a configuration file with the "slsoftkeyaccess.xml"
name is created and is saved in the file system under the following path: ../user/sinumerik/hmi/
cfg. Files can also be saved in the /oem path, which are evaluated when the system boots.
The following priority applies: oem < user.
Note
Editing the file "slsoftkeyaccess.xml"
In order to avoid errors in the xml syntax and for the softkey identifier the "slsoftkeyaccess.xml"
file may only be edited via the operating software as described above, and not directly in the
file system under "System data". It is possible that the complete file or individual entries for
softkeys can no longer be interpreted.
1.2 Set date/time
You have the possibility of manually setting the date and time for the SINUMERIK control. In
so doing, you can select from various display formats.
Formats of the date display
Formats
d.M.yy
dd.MM.yy
dd.MM.yyyy
d/M/yy
dd/MM/yy
dd/MM/yyyy
M/d/yy
MM/dd/yy
MM/dd/yyyy
yyyy/MM/dd
The following applies:
Date
d
dd
M
MM
yy
yyyy
16
Example
3.1.09
03.01.09
03.01.2009
3/01/09
03/01/09
03/01/2009
1/3/09
01/03/09
01/03/2009
2009/01/03
Description of the entry
Single or double digit day of the month (1 - 31).
Double digit day of the month, with leading zero (01 - 31).
Single or double digit month of the year (1 - 12).
Double digit month of the year, with leading zero (01 - 12).
Double digit year (00 - 99).
Four-digit year (e.g. 2009).
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate