Link Assignments - Siemens SINUMERIK 828D Commissioning Manual

Parameters
Tool search
Empty location search
Location coding
Location type
Consider adjacent location
Note
If one of the Location type or Consider adjacent location parameters is changed individually
and the value is not identical for all locations, the "Variable" definition appears in the display.
Element values
You can change the magazine location type with the parameters in the "Location" window:
Parameters
Location type
Consider adjacent location
9.8.4.5

Link assignments

You can establish the mechanical relationship between the individual components of the tool
unit in the "Assignment" window.
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
9.8 Editor for the tool and magazine management
Description
Search strategy:
● Without search strategy
● Take from the TOA
● Active tool
● Shortest way
Search strategy:
● Without search strategy
● Take from the TOA
● First location forwards
● Current location forwards
● Current location backwards
● Last location backwards
● Symmetric current location
● 1:1 exchange
● Variable
● Fixed-location coded
Identification for the magazine location type
(Changes the value globally for all locations in the magazine)
● Yes
● No
(Changes the value globally for all locations in the magazine)
Description
Identification for the magazine location type
● Yes
● No
Tool management
319