Siemens SINUMERIK 828D Commissioning Manual page 576

Spindle function
8.4 Spindle diagnostics
A more detailed description is provided in the following documentation:
References
Extended Functions Function Manual; Compensations (K3)
8.4 Spindle diagnostics
8.4.1 Spindle diagnostics
Main spindle drives are monitored via various status signals. The DRIVE-CLiQ connection at
the spindle can be used to evaluate these signals in the drive. The status signals are evaluated
for more effective diagnostics of the spindle operating states. The following information is
displayed on the user interface with the aid of the "S-Monitor" software option:
● Operating hours
● Temperatures
● Speed/torque
208
4. Press the "Configuration" softkey to edit the compensation values for a
selected axis.
The "Configuration of the Compensation Tables" window opens.
5. Enter the following:
● Type of compensation: EEC or CEC.
● Start position, end position and interpolation point spacing.
● Only for EEC:
Used measuring system - if several measuring systems are available,
select the desired system from the selection menu.
● Only for CEC:
– Compensation table (-): Index of the table in the negative direction.
– Compensation table (+): Index of the table in the positive direction.
6. Confirm your entries with the "Activate" softkey.
A dialog box to carry out a NC warm restart is then displayed to activate
the compensation. Confirm with "OK".
The "Values of the Compensation Tables" window opens.
7. Enter the desired compensation values for each interpolation point.
8. Press the "Activate" softkey again to transfer the compensation values to
the NC.
Software option
For the "Spindle diagnostics" you require the "S-Monitor" option.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate