Siemens SINUMERIK 828D Commissioning Manual page 624

Tool management
9.2 Configuring the user interface
Entries
Iconorder
DisableInNewToolDialog
DELETE_TOOLTYPE
GrindingTooltypes
Example 1
<TOOLTYPECONFIGURATION>
</TOOLTYPECONFIGURATION>
256
Meaning
Order in which the tool positions, represented by icons, are switched.
With this entry, the tool type in question is not offered when new tools
are created. If the tool list finds a tool of this type that already exists, it is
correspondingly displayed.
All predefined tool types that are not to be supported in the tool lists.
All tool types that are to be used as grinding tool types.
<TOOLTYPE_120>
<Tooltype value="120" type="uint" />
<Name value="TM_PAR_SHANK_END_CUTTER" type="QString" />
<Shortname value="TM_PPTT_SHANK_END_CUTTER" type="QString" />
<Tooltip value="TM_TTTT_SHANK_END_CUTTER" type="QString" />
<Icon9 value="to_poly_shank_end_cutter_down.png" type="QString" />
</TOOLTYPE_120>
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate