Siemens SINUMERIK 828D Commissioning Manual page 421

14 = condwait.png
15 = condwait.png
15 = condwait.png
17 = condstop.png
18 = condstop.png
19 = condstop.png
20 = condwait.png
21 = condwait.png
22 = condstop.png
23 = condstop.png
24 = condwait.png
25 = condwait.png
26 = condwait.png
27 = condwait.png
28 = condwait.png
29 = condwait.png
30 = condwait.png
31 = condwait.png
32 = condstop.png
33 = condwait.png
34 = condwait.png
35 = condwait.png
36 = condwait.png
37 = condwait.png
38 = condwait.png
39 = condwait.png
40 = condwait.png
41 = condwait.png
42 = condwait.png
43 = condwait.png
44 = condwait.png
45 = condstop.png
46 = condwait.png
47 = condwait.png
48 = condwait.png
49 = condwait.png
50 = condwait.png
51 = condwait.png
52 = condwait.png
53 = condwait.png
54 = condwait.png
55 = condwait.png
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Customizing the "Machine" operating area
5.4 Configuring the channel operational message
; Waiting for positioning axis
; Waiting for spindle
; Waiting for other channel
; Waiting for feedrate override
; Error in NC block
; Waiting for external NC blocks
; Waiting for synchronized action
; Block search active
; Spindle enable missing
; Axis feedrate override
; Waiting for tool change acknowledgment
; Gear step change
; Waiting for position control
; Waiting for thread cut
; Reserved
; Waiting for punching
; Waiting for safe operation
; No channel ready
; Oscillation active
; Axis replacement active
; Axis container rotation
; AXCT: Following axis active
; AXCT: Leading axis active
; AXCT: Follow-up active
; AXCT: Internal status change
; AXCT: Axis/spindle disable
; AXCT: Corr. motion active
; AXCT: Axis replacement active
; AXCT: Axis interpolator active
; Waiting for compile cycle
; Access to system variable
; Search target found
; Rapid retraction started
; AXCT: Wait for spindle stop
; Machine data match
; Axis replacement: Axis coupled
; Axis replacement: Liftfast active
; Axis replacement: New config active
; Axis replacement: AXCTSW active
; Axis replacement: Waitp active
; Axis in another channel
; Axis replacement: Axis is PLC axis
53