Configuration Of An Ascii Input Interface - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Config...\Interfaces... - General

Configuration of an ASCII Input Interface

Refer to "22.4.1 Overview" to access CONFIGURE ASCII Input.

Description of fields

<Use Device:> Yes or No

To accept changes and return to the screen

from where this screen was accessed.

To configure which ASCII messages to record

to which annotation. Refer to "22.4.3 Configu-

ration of Annotations".

Available unless <Device: NETx>. To create,

select, edit or delete a device. Refer to "23.2

Accessing CONFIGURE Devices /

CONFIGURE GPRS Internet Devices".

SHIFT CMND (F5)

To configure a message to be sent through the

configured port to the device. Refer to "22.4.4

Configuration of a Command to the Device".

Activates the ASCII input interface.

Available for RX1250. The Bluetooth port which will

be used for the interface functionality.