Table of Contents
Advertisement
Manage...\Configuration Sets
Step
Description
5.
CONT (F1) leads back to CONFIGURE Real-Time Mode
DEVCE (F5) to configure devices.
REF (F2) configures additional reference station options like time
slicing.
SHIFT RT-2 (F2) configures a second real-time device.
6.
CONT (F1)
The sequence of screens varies slightly when a second real-time
device was configured before the configuration set wizard was
started.
7.
The next screen depends on the setting for <Device:> in
CONFIGURE Real-Time Mode.
Set the parameters required.
8.
CONT (F1)
9.
CONFIGURE Antenna & Antenna Heights
<Antenna: AX1203+ GNSS Tripod>
<Default Ht: 0.0000>
<Meas Type: Vertical>
10.
CONT (F1)
11.
CONFIGURE Coding & Linework
<Quick Code: Off>
GPS1200+
Refer to
chapter
23.2
22.3.3
14.3.4
23.2
20.1
19.3
330
Advertisement
Table of Contents
