Configuration Of Sbas - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver
Hide thumbs Also See for GPS1200+:
Table of Contents

Advertisement

22.3.6
Description
Access step-by-step
CONFIGURE
SBAS Tracking Mode
Config...\Interfaces... - General

Configuration of SBAS

Allows a Space-Based Augmentation System to be configured to provide additional correc-
tions in conjunction with GPS signals. Also commonly referred to as Satellite-Based
Augmentation System, SBAS provides corrected time and distance measurements calcu-
lated by a network of ground relay stations and geostatic satellites. A SBAS can correct for
problems such as atmospheric delays, poor satellite geometry and incorrect satellite posi-
tioning.
Step
Description
1.
Refer to "22.3.1 Overview" to access CONFIGURE Real-Time Mode.
2.
SHIFT SBAS (F5) to access CONFIGURE SBAS Tracking Mode.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
GPS1200+
509

Advertisement

Table of Contents
loading

Table of Contents