Table of Contents
Advertisement
Equipment setup step-
by-step
Equipment Setup
f) Tripod
g) GHT57
h) GHT56
Step
Description
1.
Set up the tripod.
2.
Mount and level the tribrach on the tripod.
3.
Ensure that the tribrach is over the marker.
4.
Place and lock the carrier in the tribrach.
5.
Insert the battery into the SmartAntenna.
6.
Screw the SmartAntenna onto the carrier.
7.
Check that the tribrach is still level.
8.
Insert the CompactFlash card into the RX1250.
9.
Insert the battery into the RX1250.
10.
Attach the RX1250 to the GHT56.
11.
Attach the radio in its housing to GHT56.
12.
Screw the 90° TNC connector onto the radio housing. The 90° TNC connector is
delivered with the GHT56.
13.
Screw the radio antenna onto the 90° TNC connector.
14.
Make sure that the radio antenna is in an upright position.
15.
Place the battery into the battery compartment of the GHT56.
n) CompactFlash card
o) Battery for radio
GPS1200+
62
Advertisement
Table of Contents
