Smartrover - External Radio, Maximized Radio Coverage - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Equipment Setup

SmartRover - External Radio, Maximized Radio Coverage

The equipment setup described below is to be used for real-time rover using SmartAntenna,

RX1250X, GHT56 and an external radio. This setup is intended for surveys with the need of

maximized radio coverage.

The RX1250X is fixed to the pole grip with the GHT56. Connection between the Smart-

Antenna and the RX1250X is made via Bluetooth.

The radio attaches to the GHT56. The radio antenna is mounted on the antenna arm which

clips to the SmartAntenna. This increases the height of the radio antenna and therefore maxi-

mizes radio coverage. Connection between the radio housing and the radio antenna is made

GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-

dures may vary slightly.

Aluminium poles are used. They may be replaced with their carbon fibre equivalent

without any change to these instructions.