Table of Contents
Advertisement
22.15
Description
Access
Config...\Interfaces... - General
ASCII Remote
The ASCII remote interface is used to
•
send a command from a PC through the GX1200+ to a third party device, e.g. a barom-
eter.
•
receive a message from a third party device through the GX1200+ at a PC.
For requesting ASCII Data a Outside World Interface or Leica Binary 2 command is used.
Documentation for OWI and LB2 is available on request from the Leica Geosystems repre-
sentative.
The settings on this screen define the port and parameters for connecting a PC.
•
The PC must be connected to a port assigned to the remote interface.
•
The third party device must be connected to the port assigned to the ASCII remote inter-
face.
Select Main Menu: Config...\Interfaces.... Highlight ASCII Remote. EDIT (F3).
GPS1200+
568
Advertisement
Table of Contents
