Editing A Line/Area - Leica GPS1200+ Technical Reference Manual

9.4.3
Access
Edit line step-by-step
Manage...\Data

Editing a Line/Area

The functionality of all screens and fields are similar for the editing of both lines and areas.
The step-by-step instructions for editing a new line can be applied for areas.
Refer to "9.2 Accessing Data Management" to access MANAGE Data: Job Name.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. MANAGE Data: Job Name
2. PAGE (F6) until the Lines (X) page is active.
3. In MANAGE Data: Job Name, Lines (X) page highlight a line to be
edited.
4. EDIT (F3) to access MANAGE Edit Line: Line ID.
5. MANAGE Edit Line: Line ID, General page
The line ID and the type of points which are used to form the line
during a survey can be edited. Other line related data is shown in
output fields.
<No. of Pts:> The number of points contained within the line.
<Length:> The sum of the distances between the points in the
sequential order in which they are stored for the line. This can be a
horizontal grid distance or a geodetic distance on the WGS 1984
ellipsoid.
GPS1200+
Refer to
chapter
191