1.8
Use
Description
Equipment Setup
Real-Time Reference, Two Tripods
The equipment setup described below is to be used for real-time reference station with the
need of maximized radio coverage. Raw observation data may also be collected for post-
processing.
Refer to "1.7 Real-Time Reference, Single Tripod". The same description applies except that
the radio antenna is mounted on the second tripod. This increases the height of the radio
antenna and therefore maximizes radio coverage.
•
GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-
dures may vary slightly.
•
Standard radio mounted in radio housing is used throughout the instructions. Digital
cellular phones may also be used but the setup may differ slightly.
GPS1200+
56