40.5
40.5.1
Access step-by-step
Next step
Determine Coordinate System - Normal
Transformation Results
Accessing Transformation Results
Step
Description
The results of a transformation can be displayed during the process of determining
or updating a coordinate system.
1.
Refer to "40.2 Determining a New Coordinate System". Follow the instructions to
access DET C SYS Step 4: Check Residuals.
2.
RESLT (F3) to access DET C SYS Transformation Results.
IF
<Transfrm Type: Onestep> or
<Transfrm Type: Twostep>
<Transfrm Type: Classic 3D>
THEN
Refer to "40.5.2 Results for Onestep and Twostep
Transformations".
Refer to "40.5.3 Results for Classic 3D Transformation".
GPS1200+
977