Configuration Set For Real-Time Reference Operations - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Configuration step-by-

Manage...\Configuration Sets

Configuration Set for Real-Time Reference Operations

Configuring the receiver for real-time reference operations.

Real-time reference operations are possible with a GX1230+ or a GX1230+ GNSS. It

provides real-time to centimetre level.

In order to use a GX1210+, a GX1220+ or a GX1220+ GNSS for real-time reference opera-

tions, the RTCM v3 option must be activated. A GX1210+, GX1220+ or GX1220+ GNSS

provides DGPS to 0.25 - 1 m level.

The following table provides recommendations for the most common settings. For all other

fields, the default settings can be used. Refer to the stated chapter for more information on

individual screens.

Refer to "14.3 Creating a New Configuration Set". Follow the instruc-

tions in paragraph "Configuration step-by-step" up to step 7.

CONFIGURE Real-Time Mode

<R-Time Mode: Reference>

<R-Time Data: Leica>

CONFIGURE Data Rates

<Data: 1.0s>

<Coords: 10s>