Table of Contents
Advertisement
DET C SYS
Configuration,
Classic 3D page
Determine Coordinate System - General
Field
Option
1/Distance
Multiquadratic
Next step
PAGE (F6) changes to the Classic 3D page. Refer to paragraph "DET C SYS Configuration,
Classic 3D page".
The settings on this page define the parameters to be used in a Classic 3D transformation.
Refer to "13.2 Terminology" for more information about how many transformation parame-
ters are computed, based on the number of points common to both datums.
IF the value for a
field is
-----
any number
Description
XX
Distributes the residuals according to the distance
between each control point and the newly trans-
formed point.
Distributes the residuals using a multiquadratic inter-
polation approach.
THEN the value for this parameter will be
calculated.
fixed to that value.
GPS1200+
950
Advertisement
Table of Contents
