Table of Contents
Advertisement
38.9
Description
COGO
COGO Calculation - Shift, Rotate & Scale (Manual) Method
The COGO calculation shift, rotate & scale (manual) applies shifts and/or rotation and/or
scale to one or several known points. The values for shifts and/or rotation and/or scale are
typed in manually.
Elements that must be known are
•
the coordinates of the points to be shifted, rotated and/or scaled. They must be stored in
the active job.
•
the shift values. They can be defined as the direction of Easting, Northing and Height or
as an azimuth and a grid distance or as shift from one point to another.
•
the rotation value. It can be defined by a point as rotation center plus a rotation or by an
existing and new azimuth.
•
the scale. It is only applied to the position.
Points with full coordinate triplets, position only points and height only points can be used.
GPS1200+
883
Advertisement
Table of Contents
