Leica GPS1200+ Technical Reference Manual page 966

Determine Coordinate System - Normal
Description of columns
Column Description
WGS84 Pts The point ID of the points chosen from <WGS84 Pts Job:>.
Local Pts The point ID of the points chosen from <Local Pts Job:>.
Match The type of match to be made between the points. This information is used
in the transformation calculation. Position & Height, Position only, Height
only or None.
• For <Transfrm Type: Onestep> or <Transfrm Type: Twostep>
possible options are P & H, P only, H only or None.
• For <Transfrm Type: Classic 3D> possible options are P & H or
None.
None removes matched common points from the transformation calcula-
tion but does not delete them from the list. This can be used to help
improve residuals.
SHIFT PARAM (F5)
GPS1200+
To configure Classic 3D transformation
parameters for <Transfrm Type: Classic 3D>
or 2D & Height transformation parameters for
<Transfrm Type: Onestep> and <Transfrm
Type: Twostep> in DET C SYS Step 1:
Choose Transform Type. Refer to "39.3.1
Configuring Determine Coordinate System -
Normal" paragraph "DET C SYS Configura-
tion, Classic 3D page".
966