Table of Contents
Advertisement
Manage...\Data
Step
Description
SHIFT ELL H (F2) or SHIFT ORTH (F2). Available for local coordi-
nates. Change between the option to enter an ellipsoidal or an ortho-
metric height.
Changing the height type does not edit the point.
4.
Is <Class: MEAS>?
•
If yes, continue with step 5.
•
If no, continue with step 7.
5.
The edited point is <Class: MEAS>.
PAGE (F6) changes to the Obs page.
6.
MANAGE Edit Point: Point ID, Obs page
For GPS points
The name of the real-time reference station from where the GPS
point was measured, the name of antenna used to measure the point
and the baseline values are shown in output/observations fields.
For TPS points
It is possible to edit the reflector height.
The name of the station from where the point was measured is shown
in an output field.
Changing the reflector height recalculates the point height.
MORE (F5) Available for TPS points. Displays the horizontal angle or
the azimuth from the point to the instrument.
GPS1200+
Refer to
chapter
175
Advertisement
Table of Contents
